Warp knitting equipment efficiency:
1. Transform the counter of warp knitting machine. During the modification process, the sensor ^ a good device can accurately record shaft rotation data and hidden places to prevent damage to the sensor during shaft replacement or other operations.
When installing, considering that it is not only necessary to meet the requirements of use, but also to meet the requirements of saving data, it is considered that different braiding equipment of different structures should choose different equipment locations. In the early production of braided looms, because the shaft is driven by worm gear, the sensor is installed under the shaft head, and the shaft head is installed with 8mm bolts as induction points, which can realize each rotation of the shaft.
2. Improve the comb oscillating mechanism. The yarn is guided to the needle by the yarn guide needle to achieve the yarn cushion action. There are generally two forms of relative motion in the yarn pad process, one is the comb motion, and the knitting needle is stationary during the yarn pad process. This method is called the comb row active yarn cushion needle, the other is the comb row stationary, the knitting needle actively moves along the track of the yarn pinhole, called the comb row passive yarn cushion needle.
3. Change the warp letting and density value of the warp knitting machine. The blank cloth of different thickness can be obtained by adjusting the let-off and the density of the wool comb without changing the spacing of the grooves. Adjust the amount of comb without changing the distance between the groove plates. The grey cloth of different thickness can also be obtained by the value of warp letting and density of the velvet comb.