In the daily textile process, the factory will use the warp knitting machine to weave the fabric. Having these machines at the same time only requires the warp structure formed by two warp threads to provide up to eight looped warp threads between each cycle chain. Necessary adjustments can be made according to color, density and texture effects. So, which warp knitting machines will be used in textile mills to weave fabrics, this article will tell you through the following segments.
A Raschel is a type of warp knitting machine in which the needle moves through a floor steel plate called a pattern. At the same time, the top of the plate defines the height of the completed coil on the needle bar, and the fabric and sinker between the needle and the rising needle are pulled down to prevent the coil from moving up. And in the knitting cycle, the needle starts at a lower point when the front coil is just dropped, and the new coil connects the needle hook to the fabric. Tricot is a warp knitted fabric made of two sets of threads, and the machine features thin ribs that extend vertically on the surface of the fabric and horizontally on the back of the fabric. And in the process of weaving, the machine will strictly control the transverse movement of the bar, so as to improve the quality of the fabric.